View BYV410-600_4781261.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BYV410-600
Enhanced ultrafast dual rectifier diode
Rev. 01 -- 29 June 2009 Product data sheet
1. Product profile
1.1 General description
Enhanced ultrafast dual rectifier diode in a SOT78 (TO-220AB) plastic package.
1.2 Features and benefits
High thermal cycling performance Low on state losses Low thermal resistance Soft recovery characteristic minimizes power consuming oscillations
1.3 Applications
Dual mode (DCM and CCM) PFC Power Factor Correction (PFC) for Interleaved Topology
1.4 Quick reference data
Table 1. VRRM IO(AV) Quick reference Conditions Min square-wave pulse; = 0.5; Tmb 92 C; both diodes conducting; see Figure 1; see Figure 2 IF = 1 A; VR = 30 V; dIF/dt = 100 A/s; Tj = 25 C; see Figure 5 IF = 1 A; VR = 30 V; dIF/dt = 100 A/s IF = 10 A; Tj = 150 C IF = 10 A; Tj = 25 C; see Figure 4 Typ Max 600 20 Unit V A repetitive peak reverse voltage average output current Symbol Parameter
Dynamic characteristics trr reverse recovery time recovered charge 20 35 ns
Qr
-
15
28
C
Static characteristics VF forward voltage 1.3 1.4 1.9 2.1 V V
NXP Semiconductors
BYV410-600
Enhanced ultrafast dual rectifier diode
2. Pinning information
Table 2. Pin 1 2 3 mb Pinning information Symbol A1 K A2 K Description anode 1 cathode anode 2 mounting base; cathode
mb
A1 K
sym125
Simplified outline
Graphic symbol
A2
123
SOT78 (TO-220AB)
3. Ordering information
Table 3. Ordering information Package Name BYV410-600 TO-220AB Description Version plastic single-ended package; heatsink mounted; 1 mounting hole; 3-lead SOT78 TO-220AB Type number
4. Limiting values
Table 4. Symbol VRRM VRWM VR IO(AV) IFRM IFSM Tstg Tj Limiting values Parameter repetitive peak reverse voltage crest working reverse voltage reverse voltage average output current repetitive peak forward current non-repetitive peak forward current storage temperature junction temperature DC square-wave pulse; = 0.5; Tmb 92 C; both diodes conducting; see Figure 1; see Figure 2 = 0.5; tp = 25 s; Tmb 108 C; per diode tp = 8.3 ms; sine-wave pulse; Tj(init) = 25 C; per diode tp = 10 ms; sine-wave pulse; Tj(init) = 25 C; per diode Conditions Min -40 Max 600 600 600 20 20 132 120 150 150 Unit V V V A A A A C C
In accordance with the Absolute Maximum Rating System (IEC 60134).
BYV410-600_1
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 01 -- 29 June 2009
2 of 10
NXP Semiconductors
BYV410-600
Enhanced ultrafast dual rectifier diode
24 Ptot (W) 18 0.2 0.5
003aad262
24 Ptot (W)
003aad263
=1
a = 180 18 90 60 30 12 120
0.1 12
6
6
0
0
0
5
7
IF(AV) (A)
15
0
5
IF(AV) (A)
10
Fig 1.
Forward power dissipation as a function of average forward current; square waveform; maximum values
Fig 2.
Forward power dissipation as a function of average forward current; sinusoidal waveform; maximum values
BYV410-600_1
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 01 -- 29 June 2009
3 of 10
NXP Semiconductors
BYV410-600
Enhanced ultrafast dual rectifier diode
5. Thermal characteristics
Table 5. Symbol Rth(j-mb) Thermal characteristics Parameter thermal resistance from junction to mounting base Conditions with heatsink compound; per diode; see Figure 3 with heatsink compound; both diodes conducting Rth(j-a) thermal resistance from junction to ambient Min Typ 60 Max 2.4 1.6 Unit K/W K/W K/W
10 Zth(j-mb) (K/W) 1
001aag912
10-1
P = tp T
10-2
tp T t
10-3 10-6
10-5
10-4
10-3
10-2
10-1
1 tp (s)
10
Fig 3.
Transient thermal impedance from junction to mounting base per diode as a function of pulse width
BYV410-600_1
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 01 -- 29 June 2009
4 of 10
NXP Semiconductors
BYV410-600
Enhanced ultrafast dual rectifier diode
6. Characteristics
Table 6. Symbol VF IR Characteristics Parameter forward voltage reverse current Conditions IF = 10 A; Tj = 150 C IF = 10 A; Tj = 25 C; see Figure 4 VR = 600 V VR = 600 V; Tj = 100 C Dynamic characteristics Qr trr IRM VFR recovered charge reverse recovery time peak reverse recovery current forward recovery voltage IF = 1 A; VR = 30 V; dIF/dt = 100 A/s IF = 1 A; VR = 30 V; dIF/dt = 100 A/s; Tj = 25 C; see Figure 5 IF = 1 A; VR = 30 V; dIF/dt = 100 A/s; see Figure 5 IF = 1 A; dIF/dt = 100 A/s; see Figure 6 15 20 1.4 3.2 28 35 1.9 C ns A V Min Typ 1.3 1.4 13 1 Max 1.9 2.1 50 1.5 Unit V V A mA
Static characteristics
12 IF (A)
003aad261
IF
dlF dt
trr 8 time
(1) (2) (3)
25 % Qr 100 %
4
IR 0 0 1 2 VF (V) 3
IRM
003aac562
Fig 5.
Reverse recovery definitions; ramp recovery
Fig 4.
Forward current as a function of forward voltage
BYV410-600_1
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 01 -- 29 June 2009
5 of 10
NXP Semiconductors
BYV410-600
Enhanced ultrafast dual rectifier diode
IF
time VF
VFRM VF time
001aab912
Fig 6.
Forward recovery definitions
BYV410-600_1
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 01 -- 29 June 2009
6 of 10
NXP Semiconductors
BYV410-600
Enhanced ultrafast dual rectifier diode
7. Package outline
Plastic single-ended package; heatsink mounted; 1 mounting hole; 3-lead TO-220AB SOT78
E p
A A1 q
D1
mounting base
D
L1(1)
L2(1) Q
L
b1(2) (3x) b2(2) (2x)
1 2 3
b(3x) e e
c
0
5 scale
10 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 4.7 4.1 A1 1.40 1.25 b 0.9 0.6 b1(2) 1.6 1.0 b2(2) 1.3 1.0 c 0.7 0.4 D 16.0 15.2 D1 6.6 5.9 E 10.3 9.7 e 2.54 L 15.0 12.8 L1(1) 3.30 2.79 L2(1) max. 3.0 p 3.8 3.5 q 3.0 2.7 Q 2.6 2.2
Notes 1. Lead shoulder designs may vary. 2. Dimension includes excess dambar. OUTLINE VERSION SOT78 REFERENCES IEC JEDEC 3-lead TO-220AB JEITA SC-46 EUROPEAN PROJECTION ISSUE DATE 08-04-23 08-06-13
Fig 7.
BYV410-600_1
Package outline SOT78 (TO-220AB)
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 01 -- 29 June 2009
7 of 10
NXP Semiconductors
BYV410-600
Enhanced ultrafast dual rectifier diode
8. Revision history
Table 7. Revision history Release date 20090629 Data sheet status Product data sheet Change notice Supersedes Document ID BYV410-600_1
BYV410-600_1
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 01 -- 29 June 2009
8 of 10
NXP Semiconductors
BYV410-600
Enhanced ultrafast dual rectifier diode
9. Legal information
9.1 Data sheet status
Product status[3] Development Qualification Production Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification.
Document status [1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet
[1] [2] [3]
Please consult the most recently issued document before initiating or completing a design. The term 'short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
9.2
Definitions
Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Quick reference data -- The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities.
9.3
Disclaimers
General -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk.
9.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.
10. Contact information
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com
BYV410-600_1
(c) NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 01 -- 29 June 2009
9 of 10
NXP Semiconductors
BYV410-600
Enhanced ultrafast dual rectifier diode
11. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 9.1 9.2 9.3 9.4 10 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . .1 General description . . . . . . . . . . . . . . . . . . . . . .1 Features and benefits . . . . . . . . . . . . . . . . . . . . .1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Quick reference data . . . . . . . . . . . . . . . . . . . . .1 Pinning information . . . . . . . . . . . . . . . . . . . . . . .2 Ordering information . . . . . . . . . . . . . . . . . . . . . .2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . .2 Thermal characteristics . . . . . . . . . . . . . . . . . . .4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . .7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . .8 Legal information. . . . . . . . . . . . . . . . . . . . . . . . .9 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . .9 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Contact information. . . . . . . . . . . . . . . . . . . . . . .9
Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'.
(c) NXP B.V. 2009.
All rights reserved.
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 29 June 2009 Document identifier: BYV410-600_1

▲Up To Search▲

Price & Availability of BYV410-600

	To Download BYV410-600 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .